PowerPlant LED Controller

The powerplant controller is a simple to perate and program touch screen device which will help indoor gardeners to get the most out of the PowerPlant LED Fixtures or any LED fixture which has 0-10 volt controllability by usnig RJ9 (4P4C) on the port A & B of th econtroller side to RJ14 connections to the fixture (conversion leads may be possible)

This allows control up to 100 linked fixtures at once per port allowing a total of 200 fixtures!, The controller is programmable to control day & night lighting cycles and features simulated period of 'sunrise' and 'sunset' to protect plants from sudden light and temperature change.

The controller feautures a temperature sensitive auto-dimming and emergency shutdown function to protect plants from high temperatures using the plug in temperature sensor, a life saver in severe weather conditions. Simply put if your temps reach the set temp for dim the unit will reduce output to 50% and slowly increase to the out put upto the programmed temperature to maintain the temp but allow the maximum light output for the conditions, if the temos continue to rise and the temphits the maximum allowed temp the unit will shut the fixtures off untill safe to power on, We advise unless all 100 fixtures used per port are in use to use both ports with both dim settings the same but the max high temp setting a few degrees apart so there should be hopefully no loss of light at any time or unless extremely severe instances.

Technical Specifications

2* 100 fixture controllability.

RJ 9 to RJ14 connections.

Input: 5 V DC.

Output: 11.5 V DC Max.